Delete Captive Portals - Digi TX40 User Manual

Firewall
n none: Users are not required to enter any information to access the portal.
n login: Users are required to authenticate with an account on this device. Users must be
part of a user group that allows access to this portal.
n info: Users are required to complete a form to continue. The form fields may be
customize.
8. (Optional) Set the title of the portal page that the user will see when accessing the portal:
(config firewall portal portal1)> title "Corporate portal"
(config firewall portal portal1)>
9. (Optional) Set a message that will appear on the portal page:
(config firewall portal portal1)> message "Welcome to the corporate web
portal"
(config firewall portal portal1)>
10. (Optional) Set the terms and conditions that ill appear on the portal page. Users will be
required to agree to the terms and conditions before being granted access to the portal.
(config firewall portal portal1)> terms "Accept the terms and conditions
of this portal"
(config firewall portal portal1)>
11. (Optional) Set the URL to which the user will be directed when granted access to the portal. If
left blank, the user will be directed to the domain of the URL in the original access request.
(config firewall portal portal1)> url https://myportal.com
(config firewall portal portal1)>
12. Save the configuration and apply the change
(config)> save
Configuration saved.
>
13. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Delete captive portals

To delete captive portals:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
TX40 User Guide
Configure captive portals
926