Table of Contents
Advertisement
Interfaces
Alternatively, you can configure the WAN/ETH1 port to function as a LAN port, or you can include the
WAN/ETH1 port in the default LAN bridge or create a bridge that includes the WAN/ETH1 port with
and/or Wi-Fi access points.
Configure the WAN/ETH1 Ethernet port as a LAN
This procedure reconfigures the WAN/ETH1 port to serve as port for a LAN, which will result in the
device having two separate LANs: the default LAN LAN, and the LAN created in this procedure. To
utilize both LANs, you will need to have a device connected to the WAN/ETH1 port, and a separate
device connected to the default LAN, and these devices will be on separate LANs.
If instead, you want the WAN/ETH1 port to beincluded in the default LAN, see
includes the WAN/ETH1
an other devices, see
To configure the WAN/ETH1 Ethernet port as a LAN:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces > WAN.
4. For Zone, select Internal.
5. Configure IPv4 settings:
a. Click to expand IPv4.
b. For Type, select Static IP address.
TX40 User Guide
port, or if you want to create a new bridge that includes the WAN/ETH1 port
Create a bridge that includes the WAN/ETH1
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
Create a bridge that
port.
175
Advertisement
Table of Contents
