Table of Contents
Advertisement
Serial port
Configure UDP serial mode
The UDP serial mode option in the serial port configuration provides access to the serial port using
UDP.
To change the configuration to match the serial configuration of the device to which you want to
connect:
Web
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the menu, click System. Under Configuration, click Serial Configuration.
The Serial Configuration page is displayed.
Note
You can also configure the serial port by using Device Configuration > Serial. Changes
made by using either Device Configuration or Serial Configuration will be reflected in both.
2. Click to expand the port that you want to configure for UDP serial mode.
The serial port is enabled by default. To disable, toggle off Enable.
3. For Mode, select UDP serial.
The default is Login.
4. (Optional) For Label, enter a label that will be used when referring to this port.
5. Expand Serial Settings.
TX40 User Guide
Configure UDP serial mode
265
Advertisement
Table of Contents
