Table of Contents
Advertisement
Applications
Install Python
Beginning with firmware release 21.11.x, python is no longer included as part of the base firmware for
the TX40 device. To install Python, you must first upgrade your device's firmware to release 22.5.50.62
or greater. Python is also available as part of the base firmware firmware with release 21.8.x and
earlier.
There are two options for installing Python on your TX40 device running 22.5.50.62 or greater:
n
Option 1: Enable Python via Digi Remote Manager
n
Option 2: Install Python via the local device
Option 1: Enable Python via Digi Remote Manager
As part of creating or updating a configuration profile for TX40 devices, you can enable the Python
add-on at the automation tab for the configuration:
1. In Remote Manager, create a new configuration or edit an existing configuration for the TX40
device type.
2. At the Automation tab, under Add-ons, click to enable Python.
If the configuration is enabled and Remediate is selected, Remote Manager will install and enable
Python on all TX40 devices to which the configuration applies.
Option 2: Install Python via the local device
1. On your PC, download the Python live image for the TX40 to your local filesystem.
To download the Python live image for firm version 23.9.74.0:
To download the Python live image for older firmware versions:
n
For firmware version 22.5.50.62:
n
For firmware version 22.8.33.50:
n
For firmware version 22.11.48.10:
2. Rename the downloaded file to python_live_image.sqfs. The filename must exactly match
this in order for the Digi device to load the python live image properly.
TX40 User Guide
Develop Python applications
775
Advertisement
Table of Contents
