Show Openvpn Client Status And Statistics - Digi TX40 User Manual

Virtual Private Networks (VPN)
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show OpenVPN client status and statistics

You can view status and statistics for OpenVPN clients from either web interface or the command line:

Web
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the menu, select Status > OpenVPN > Clients.
The OpenVPN Clients page appears.
2. To view configuration details about an OpenVPN client, click the  (configuration) icon in the
upper right of the OpenVPN client's status pane.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured OpenVPN clients, type the following at the prompt:
> show openvpn client all
Client
---------------
OpenVPN_Client1
OpenVPN_Client2
>
3. To display details about a specific client:
> show openvpn client name OpenVPN_client1
Client
Enable
Status
Username
IP address
Remote
MTU
Zone
IP Address
Port
Use File
Metric
TX40 User Guide
Enable Status Username
------ ------- --------
true connected
true pending
: OpenVPN_client1
: true
: up
: user1
: 123.122.121.120
: 120.121.122.123
: 1492
: internal
: 192.168.30.1/24
: 1194
: true
: 0
OpenVPN
Use File Zone
-------- --------
true internal
true internal
564