Other Default Configuration Settings - Digi IX20W-PR User Manual

Firmware configuration
Interface
type Preconfigured interfaces
Local Area
n ETH2
Network
(LAN)
n Loopback
Default IP
n
n Default Link-local IP
Wi-Fi
n Wi-Fi access point: Digi AP
(available
with IX20 W
models
only)
Bridges
Bridge: LAN
n
(Wi-Fi
model
only)

Other default configuration settings

Feature
Central
management
Security policies
IX20 User Guide
Configuration
n Digi Remote Manager enabled as the central management service.
n Packet filtering allows all outbound traffic.
n SSH and web administration:
Review IX20 default settings
Devices Default configuration
n Ethernet: n Firewall zone:
ETH2 (non- Internal
n IP address:
Wi-Fi
192.168.2.1/24
models)
n DHCP server
n Bridge: LAN
enabled
(Wi-Fi
LAN priority:
n
models)
Metric=5
n Ethernet: n Firewall zone:
Loopback Loopback
n IP address:
127.0.0.1/8
Bridge: LAN Firewall zone: Setup
n n
IP address
n
192.168.210.1/24
n Bridge: LAN n Firewall zone: Setup
IP address
n
169.254.100.100/16
n Wi-Fi radio n Enabled
n SSID: Digi-IX20W-
serial_number
n Encryption: WPA2
Personal (PSK)
Pre-shared key: The
n
unique password
printed on the
bottom label of the
device.
Ethernet: Enabled
n n
n Used by the ETH1
ETH2
n Wi-Fi access interface
point: Digi
AP
44