Table of Contents
Advertisement
Configuration and management
Interface type
Hotspot
Other default configuration settings
Feature
Central
management
Security policies
Monitoring
Serial port
Change the default password for the admin user
The unique, factory-assigned password for the default admin user account is printed on the bottom
label of the device and on the loose label included in the package.
If you erase the device configuration or reset the device to factory defaults, the password for the
admin user will revert to the original, factory-assigned default password.
To change the default password for the admin user:
WebUI
TX54 User Guide
Preconfigured interfaces
hotspot
n
Configuration
Digi Remote Manager enabled as the central management service.
n
Packet filtering allows all outbound traffic.
n
SSH and web administration:
n
Enabled for local administration
l
Firewall zone: Internal
l
Device heath metrics uploaded to Digi Remote Manager at 60 minute
n
interval.
SNMP: Disabled
n
Enabled
n
Serial mode: Login
n
Label: None
n
Baud rate: 115000
n
Data bits: 8
n
Parity: None
n
Stop bits: 1
n
Flow control: None
n
Change the default password for the admin user
Devices
Default configuration
Bridge:
n
n
hotspot_
n
bridge
n
n
n
Disabled
Authentication
mode: Click-through
IP address:
10.1.0.1/24
DHCP server:
Automatically
enabled (on all
hotspots)
DHCP server lease
range: 100-250
43
Advertisement
Table of Contents
