Table of Contents
Advertisement
Firmware
configuration
Change the default SSIDs and pre-shared keys for the
preconfigured Wi-Fi access points
By default, the SSIDs and pre-shared keys for the preconfigured Wi-Fi access points are:
Enabled
n
SSID: Digi-TX40-serial_number
n
Encryption: WAP2 Personal (PSK)
n
Pre-shared key: The unique password printed on the bottom label of the device.
n
Note
When Primary Responder mode is enabled, pre-configured access points are enabled by default.
For more information about Primary Responder mode, see
operation and Primary Responder
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
TX40 User Guide
Change the default SSIDs and pre-shared keys for the preconfigured Wi-Fi access
mode.
Use Digi Remote Manager to view and manage your
Differences between standard firmware
points
41
Advertisement
Table of Contents
