Update Cellular Module Firmware - Digi TX40 User Manual

System administration
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Duplicate the firmware:
> system duplicate-firmware
>

Update cellular module firmware

You can update modem firmware by downloading firmware from the Digi firmware repository, or by
uploading firmware from your local storage onto the device. You can also schedule modem firmware
updates. See Schedule system maintenance tasks
Note Before attempting to update cellular module firmware, you should either ensure that there is a
SIM card in the module, or disable SIM failover. See
for details about SIM failover.

Web
1. (Optional) Download the appropriate modem firmware from the Digi repository to your local
machine.
Log into the TX40 WebUI as a user with full Admin access rights.
2. From the main menu, click Status > Modems.
3. Click the modem firmware version.
The Modem firmware update window opens.
4. To update using firmware from the Digi firmware repository:

a. Click
b. For Available firmware, select the firmware.
TX40 User Guide
to view available versions.
Update cellular module firmware
for details.
Configure a Wireless Wide Area Network (WWAN)
975