Digi TX40 User Manual page 356

Hotspot
n Change the default hotspot
n Change the default authentication method:
Configure the hotspot to use local shared password
l
Configure the hotspot to use RADIUS shared password
l
Configure the hotspot to use RADIUS users
l
Configure the hotspot to use HotspotSystem
l
n Change the default hotspot IP address and
n Modify the sample local HTML page that the TX40 device uses by default for click-through
authentication. See

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Enable the hotspot:
a. Click Network > Hotspots > hotspot.
b. Click Enable hotspot.
TX40 User Guide
SSID.
subnet.
Edit sample hotspot HTML pages
Use Digi Remote Manager to view and manage your
authentication.
authentication.
authentication.
authentication.
for information.
Hotspot configuration
356