Digi TX40 User Manual page 377

Hotspot
n To enable, it it has been disabled:
(config network hotspot new_hotspot)> enable true
(config network hotspot new_hotspot)>
6. Add devices to the bridge:
a. Determine available devices:
(config network bridge new_hotspot_bridge)> .. .. interface lan1
device ?
Default value: /network/bridge/lan1
Current value: /network/bridge/lan1
(config network bridge new_hotspot_bridge)>
b. Add the appropriate device. For example, to add the Digi AP (Wi-Fi1) Wi-Fi access point:
(config network bridge new_hotspot_bridge)> add device end
/network/wireless/ap/digi_ap1
(config)>
7. Set an access point, and Ethernet port, or a bridge for the hotspot's device:
a. Determine available devices:
(config network hotspot new_hotspot)> device ?
Device: Device to use for this hotspot interface.
Format:
/network/device/eth1
/network/device/eth2
/network/device/loopback
/network/bridge/hotspot_bridge
/network/bridge/lan1
/network/bridge/new_hotspot_bridge
/network/wifi/ap/digi_ap1
/network/wifi/ap/digi_ap2
/network/wifi/ap/digi_hotspot_ap1
/network/wifi/ap/digi_hotspot_ap2
/network/wifi/ap/new_hotspot_ap1
/network/wifi/ap/new_hotspot_ap2
Current value:
(config network hotspot new_hotspot)>
b. Add the device:
(config network hotspot new_hotspot)> device /network/bridge/new_
hotspot_bridge
(config network hotspot new_hotspot)>
TX40 User Guide
Hotspot configuration
377