Digi TX40 User Manual page 185

Interfaces
In this example, we will:
1. Create a new Wi-Fi access point (TX40Wmodels only).
2. Create a new bridge that consists of the new access point and the ETH1 device.
In this configuration, the ETH1 device will no longer be part of a WAN. Internet access will be
provided by the cellular modem.
3. Create two new LANs:
LAN1 will be configured to use the new bridge.
n
LAN2 will be configured to use the ETH2 device.
n
Task one: Create a new access point (TX40W models only)

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Wi-Fi > Access points.
TX40 User Guide
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
185