Digi TX40 User Manual page 379

Hotspot
11. (Optional) Set the port number that the hotspot authentication server will used.
(config network hotspot new_hotspot)> auth_port port
(config network hotspot new_hotspot)>
The default is 3990.
12. (Optional) Set the port number of the hotspot server.
(config network hotspot new_hotspot)> server_port port
(config network hotspot new_hotspot)>
The default is 4990.
13. If remote is selected for login:
a. Set the IP address or fully-qualified domain name or the remote web server that will be
used for client authentication:
(config network hotspot new_hotspot)> remote url address
(config network hotspot new_hotspot)>
a. (Optional) Set the shared secret that the remote server and the hotspot. Used with cloud-
based hotspot providers.
(config network hotspot new_hotspot)> remote secret secret
(config network hotspot new_hotspot)>
14. (Optional) Change the default DHCP server configuration.
Note The hotspot DHCP server is automatically enabled and cannot be disabled.
a. Set the amount of time that a client DHCP lease is valid:
(config network hotspot new_hotspot)> ipv4 address dhcp_server lease_
time value
(config network hotspot new_hotspot)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the
format number{w|d|h|m|s}.
For example, to set lease_time to ten minutes, enter either 10m or 600s:
(config network hotspot new_hotspot)> ipv4 dhcp_server lease_time 600s
(config network hotspot new_hotspot)>
The default is 10 minutes.
b. Set the lowest IP address in the range to assign to hotspot clients. This value represents
the low order byte of the IP address, and is combined with the subnet of the hotspot's
static IP address.
(config network hotspot new_hotspot)> ipv4 address dhcp_server lease_
start value
(config network hotspot new_hotspot)>
where value is any integer between 1 and 254. The default is 100.
TX40 User Guide
Hotspot configuration
379