Wi-Fi Configuration; Default Access Point Ssid And Password; Default Wi-Fi Configuration - Digi TX40 User Manual

Wi-Fi

Wi-Fi configuration

The TX40 device has two Wi-Fi radios. You can configure the Wi-Fi radios for Wi-Fi access point mode
and Wi-Fi client mode. By default, the TX40 radios are configured to use access point mode.
Note When Primary Responder mode is enabled, pre-configured access points are disabled by default.
For more information about Primary Responder mode, see
operation and Primary Responder

Default access point SSID and password

By default, the TX40 device has two access points enabled. The default SSID for both of the access
point is:
Digi-TX40-serial_number
The password for the default access point is the unique password as found on the device's label. See
Change the default SSIDs and pre-shared keys for the preconfigured Wi-Fi access points
information about changing the default SSID and password.

Default Wi-Fi configuration

The default Wi-Fi configuration of the TX40 device is:
TX40 User Guide
Differences between standard firmware
mode.
Wi-Fi configuration
for
298