Table of Contents
Advertisement
Firewall
Configure captive portals
Captive portals are commonly used on public-access networks to require users to login or accept
terms and conditions before accessing the internet.
To configure captive portals:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Captive portals.
4. For Add captive portal:, enter a name for the portal and click .
The captive portal configuration window is displayed.
The captive portal is enabled by default. To disable, toggle off Enable.
5. For Interface, select the network interface for the portal.
Traffic received on this interface's network device will not be forwarded unless the client has
been granted access.
TX40 User Guide
Use Digi Remote Manager to view and manage your
Configure captive portals
923
Advertisement
Table of Contents
