Table of Contents
Advertisement
Services
2. Use the
show wan-bonding
> show wan-bonding
WAN Bonding Status
------------------
Status
Server Address
Tunnel Username
Tunnel Address
WAN Bonded Interfaces
---------------------
Channel #0:
Channel #1:
>
3. Use the
show wan-bonding
> show wan-bonding verbose
WAN Bonding Status
------------------
Tunnel Info
----------------
Status
Endpoint
Network
Total Bytes
Channel Online
Channel #0 (eth1)
----------------
Enabled
Status
Uptime
Latency
In Transit
Last Error
Current (1sec)
Total
Channel #1 (wwan0.1)
----------------
Enabled
Status
Uptime
Latency
In Transit
TX40 User Guide
command at the system prompt:
: Connected
: 133.183.203.237
: test1
: 146.78.40.226
: eth1 (eth1)
: wwan1 (wwan0.1)
command to view additional status and statistics:
connected
133.183.203.237:443 (#0)
146.78.40.226/255.255.255.0 gw 146.78.40.1
0 in, 427 out
2
Yes
"connected"
5 sec
41ms (current) / 41ms (idle)
0
null
RX 4 sent, 0 lost; TX 5 sent, 0 lost, 4 acked
RX 16 sent, 0 lost; TX 18 sent, 0 lost, 18 acked
Yes
"connected"
5 sec
55ms (current) / 57ms (idle)
0
WAN bonding
664
Advertisement
Table of Contents
