Table of Contents
Advertisement
Wi-Fi
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
4. Create a new access point or modify an existing access point:
n
To create a new access point, for Add WiFi access point:, type a name for the access
point and click .
n
To modify an existing access point, click to expand the access point.
The Wi-Fi access point configuration window is displayed.
5. For SSID, type the SSID. Up to 32 characters are allowed.
6. Enable SSID broadcast to configure the radio to broadcast the SSID.
TX40 User Guide
Configure an open Wi-Fi access point
Use Digi Remote Manager to view and manage your
309
Advertisement
Table of Contents
