Table of Contents
Advertisement
Hotspot
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3.
Create a new hotspot
4. During hotspot configuration, for Authentication mode, select RADIUS users .
5. Click to expand Radius.
a. For Primary server name, enter the IP address or fully-qualified domain name of the
primary RADIUS server to use to authenticate hotspot users.
b. (Optional) For Secondary server name, enter the IP address or fully-qualified domain
name of the backup RADIUS server to use to authenticate hotspot users if the primary
RADIUS server is not available.
c. (Optional) For Port, type the port number to use for RADIUS authentication requests. The
default is 1812.
d. (Optional) For Accounting port, type the port number to use for RADIUS accounting
requests. The default is 1813.
e. For Secret, enter the shared secret for the RADIUS server. This is configured on the RADIUS
server.
f. For NAS ID, enter the unique Network Access Server (NAS) identifier used by the
RADIUS server. The default is hotspot.
g. (Optional) Enable Swap Octets to swap the meaning of the input octets/packets and
output octets/packets RADIUS attributes. This can fix issues if the data limits and/or
accounting reports appear to be reversed on the RADIUS server. The default is disabled.
6. Click to expand Walled garden.
Walled garden settings define the "white list" of domains and subnets that unauthenticated
clients are able to access. Include the domain or subnet of the RADIUS server(s) that are being
used for authentication.
n
To add domains that can be accessed by the client prior to authentication:
a. Click to expand Allowed domains.
b. Click to add a domain.
c. For Domain, type the hostname of the allowed domain.
d. Repeat to add additional domains.
n
To add subnets that can be accessed by the client prior to authentication:
a. Click to expand Allowed subnets.
b. Click to add a subnet.
c. For Subnet, type an IPv4 address and optional subnet mask, using the format IPv4_
d. Repeat to add additional subnets.
7. Click Apply to save the configuration and apply the change.
Configure hotspot for RADIUS users authentication from the Command line
TX40 User Guide
or
Enable hotspot using the default
address[/netmask], or the keyword any.
Hotspot configuration
configuration.
388
Advertisement
Table of Contents
