Configure The Device To Accept Location Messages From External Sources - Digi TX40 User Manual

Services
where int is any integer between -90 and 90, with up to six decimal places.
7. Set the longitude of the device:
(config service location source 02 coordinates longitude int
(config service location source 02)>
where int is any integer between -180 and 180, with up to six decimal places.
8. Set the altitude of the device:
(config service location source 02 coordinates altitude alt
(config service location source 02)>
Where alt is an integer followed by m or km, for example, 100m or 1km.
9. Save the configuration and apply the change
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Configure the device to accept location messages from external
sources
You can configure the TX40 device to accept NMEA and TAIP messages from external sources. For
example, location-enabled devices connected to the TX40 device can forward their location
information to the device, and then the TX40 device can serve as a central repository for this location
information and forward it to a remote host. See
information about configuring the TX40 device to forward location messages.
This procedure configures a UDP port on the TX40 device that will be used to listen for incoming
messages.
Required configuration items
The location server must be enabled.
n
UDP port that the TX40 device will listen to for incoming location messages.
n
Access control list configuration to provide access to the port through the firewall.
n
To configure the device to accept location messages from external sources:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
TX40 User Guide
Forward location information to a remote host
Use Digi Remote Manager to view and manage your
Location information
for
682