User authentication
Note
When Primary Responder mode is enabled, Telnet is not available. For more information
about Primary Responder mode, see
Primary Responder
Serial access: Users with Serial access have the ability to log into the TX40 device by using the
n
serial console.
Preconfigured authentication groups
The TX40 device has two preconfigured authentication groups:
The admin group is configured by default to have full Admin access.
n
The serial group is configured by default to have Serial access.
n
The preconfigured authentication groups cannot be deleted, but the access rights defined for the
group are configurable.
This section contains the following topics:
Change the access rights for a predefined group
Add an authentication group
Delete an authentication group
TX40 User Guide
Differences between standard firmware operation and
mode.
Authentication groups
843
845
849
842