Digi TX40 User Manual page 741

Services
6. Add Ethernet devices:
a. Use the ? to determine available devices:
(config network bond eth_bond)> ... network device ?
Additional Configuration
---------------------------------------------------------------------
-------
loopback
(config network bond eth_bond)>
b. Add a device:
(config network bond eth_bond)> add device /network/device/
(config network bond eth_bond)>
c. Repeat to add additional devices.
7. Create a new network interface that is linked to the Ethernet bond:
a. Type ... to return to the root of the configuration:
(config network bond eth_bond)> ...
(config)>
b. Create a new interface, for example:
(config)> add network interface eth_bond_interface
(config network interface eth_bond_interface)>
c. For device, select the Ethernet bond created above:
(config network interface eth_bonding_interface)> device
/network/bond/eth_bond
(config network interface eth_bonding_interface)>
d. Complete the rest of the interface configuration. See
or Configure a Local Area Network (LAN)
8. Disable any other interfaces associated with the devices that were added to the Ethernet bond.
For example, if ETH1 and ETH2 were added to the Ethernet bond, and they are included with
the WAN and LAN interfaces:
a. Type ... to return to the root of the configuration:
(config network interface eth_bonding_interface)> ...
(config)>
b. Disable the interfaces:
TX40 User Guide
Ethernet network bonding
Configure a Wide Area Network (WAN)
for further information.
741