Show Wi-Fi Client Status And Statistics - Digi TX40 User Manual

Wi-Fi
2. At the Admin CLI prompt, type show wifi ap name name:
> show wifi ap name my_AP
my_AP Access Point Status
-------------------------
Enabled
Status
SSID
Security
Channel
Channel Width
Radio
BSSID
Client
-----------------
cc:c0:78:34:d5:a2
>

Show Wi-Fi client status and statistics

You can show summary status for all Wi-Fi clients, and detailed status and statistics for individual Wi-
Fi clients.

Web
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the main menu, click Status.
2. Under Connections, click Wi-Fi > Clients.

Command line
Show summary of Wi-Fi clients
To show the status and statistics for Wi-Fi client, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi client:
> show wifi client
Client
---------
my_client
TX40 User Guide
: true
: up
: my_AP
: none
:
:
: wifi1
: 01:41:D1:14:36:37
Signal RX Bytes
------ -__-----
-68 260997
Enabled SSID Status
------- -------- ------
true my_SSID up
Show Wi-Fi client status and statistics
TX Bytes Uptime
-------- ------
279481 801
show wifi client command.
Signal MAC Address
------ -----------------
-43 91:fe:86:d1:0e:81
349