Digi TX40 User Manual page 357

Hotspot
4. Enable the hotspot access points:
a. Click Network > Wi-Fi > Access points > Digi Hotspot AP (Wi-Fi1).
b. Click Enable.
c. Click Digi Hotspot AP (Wi-Fi2).
d. Click Enable.
5. Enable the hotspot bridge:
a. Click Network > Bridges > hotspot_bridge.
b. Click Enable.
6. Enable the hotspot LAN:
a. Click Network > Interface > LAN > LAN hotspot.
b. Click Enable.
7. Click Apply to save the configuration and apply the change.

Command line
TX40 User Guide
Hotspot configuration
357