Digi TX40 User Manual page 350

Wi-Fi
>
3. To view information about both active and inactive clients, include the all parameter:
> show wifi client all
Client
---------
my_client
client2
>
Show detailed status and statistics of a specific Wi-Fi client
To show a detailed status and statistics of a Wi-Fi client, use the show wifi client name name
command.
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi cleint name name:
> show wifi client name my_client
Client
Enabled
SSID
Status
Signal
MAC Address
Channel
Radio
TX Power
Link Quality
BSSID
>
TX40 User Guide
Enabled SSID Status
------- -------- ------
true my_SSID up
true SSID2 down
: my_client
: true
: my_SSID
: up
: -43
: 91:fe:86:d1:0e:81
: 48
: wifi1
: 23
: 67/70
: 6D:B9:DD:BD:EE:C4
Show Wi-Fi client status and statistics
Signal MAC Address
------ -----------------
-43 91:fe:86:d1:0e:81
350