Table of Contents
Advertisement
User authentication
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Users.
4. In Add User, type a name for the user and click .
The user configuration window is displayed.
The user is enabled by default. To disable, toggle off Enable.
5. (Optional) For Username alias, type an alias for the user.
Because the name used to create the user and cannot contain special characters such as
hyphens (-) or periods (.), an alias allows the user to log in using a name that contains special
characters. For security purposes, if two users have the same alias, the alias will be disabled.
6. Enter a password for the user. The password must be at least eight characters long and must
contain at least one uppercase letter, one lowercase letter, one number, and one special
character.If the
characters long and must contain at least one uppercase letter, one lowercase letter, one
number, and one special character.
TX40 User Guide
Use Digi Remote Manager to view and manage your
primary responder feature
is enabled, the password must be at least 10
Local users
855
Advertisement
Table of Contents
