Table of Contents
Advertisement
Virtual Private Networks (VPN)
f. (Optional) Set the metric for the tunnel:
(config vpn l2tp lns lns_server)> metric int
(config vpn l2tp lns lns_server)>
where int is an integer between 0 and 65535. The default is 1.
g. Set the firewall zone for the tunnel. This is used by packet filtering rules and access control
lists to restrict network traffic on the tunnel.
i. Use the ? to determine available zones:
(config vpn l2tp lns lns_server)> zone ?
Zone: The firewall zone assigned to this tunnel. This can be used
by packet
filtering rules and access control lists to restrict network
traffic on this
tunnel.
Format:
Current value:
(config vpn l2tp lns lns_server)>
ii. Set the zone:
(config vpn l2tp lns lns_server)> zone zone
(config vpn l2tp lns lns_server)>
h. (Optional): Custom PPP configuration:
i. Enable custom PPP configuration:
(config vpn l2tp lac lns lns_server)> custom enable true
(config vpn l2tp lns lns_server)>
ii. Enable overriding, if the custom configuration should override the default
configuration and only use the custom options:
(config vpn l2tp lns lns_server)> custom override true
(config vpn l2tp lns lns_server)>
TX40 User Guide
any
dynamic_routes
edge
external
hotspot
internal
ipsec
loopback
setup
L2TP
602
Advertisement
Table of Contents
