Table of Contents
Advertisement
Virtual Private Networks (VPN)
4. For Add, type a name for the OpenVPN client and click .
The new OpenVPN client configuration is displayed.
5. The OpenVPN client is enabled by default. To disable, toggle off Enable.
6. The default behavior is to use an OVPN file for client configuration. To disable this behavior
and configure the client manually, click Use .ovpn file to disable.
7. For Device type, select the mode used by the OpenVPN server, either TUN or TAP.
8. For Zone, select the firewall zone for the OpenVPN client.
9. (Optional) Select the Metric for the OpenVPN client. If multiple active routes match a
destination, the route with the lowest metric will be used.
10. (Optional) For Username and Password, type the login credentials as configured on the
OpenVPN server.
11. For VPN server IP, type the IP address of the OpenVPN server.
12. (Optional) Set the VPN port used by the OpenVPN server. The default is 1194.
13. Paste the contents of the CA certificate (usually in a ca.crt file), the Public key (for example,
client.crt), and the Private key (for example, client.key) into their respective fields. The
contents will be hidden when the configuration is saved.
14. (Optional) Click to expand Advanced Options to manually set additional OpenVPN
parameters.
TX40 User Guide
OpenVPN
543
Advertisement
Table of Contents
