Table of Contents
Advertisement
Wi-Fi
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > WiFi > Access points.
4. Create a new access point or modify an existing access point:
To create a new access point, for Add WiFi access point:, type a name for the access
n
point and click .
n
To modify an existing access point, click to expand the access point.
The Wi-Fi access point configuration window is displayed.
5. For SSID, type the SSID. Up to 32 characters are allowed.
6. Enable SSID broadcast to configure the radio to broadcast the SSID.
7. (Optional) Enable Isolate clients to prevent clients that are connected to this access point
from communicating with each other. See
prevent clients connected to different access points from communicating with each other.
8. For Encryption, select either:
TX40 User Guide
Configure a Wi-Fi access point with enterprise security
Isolate Wi-Fi clients
for information about how to
324
Advertisement
Table of Contents
