Table of Contents
Advertisement
Interfaces
The IPv6 management priority of the WAN. The active interface with the highest
l
management priority will have its address reported as the preferred contact address for
central management and direct device access.
The IPv6 Maximum Transmission Unit (MTU) of the WAN.
l
When to use DNS: always, never, or only when this interface is the primary default route.
l
SureLink active recovery configuration. See
l
WAN/WWAN failures
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create the WWAN or select an existing WWAN:
n
To create a new WWAN:
a. For Add interface, type a name for the WWAN and click .
TX40 User Guide
Configure SureLink active recovery to detect
for further information.
Use Digi Remote Manager to view and manage your
Wide Area Networks (WANs)
152
Advertisement
Table of Contents
