Digi TX40 User Manual page 545

Virtual Private Networks (VPN)
Format:
any
dynamic_routes
edge
external
hotspot
internal
ipsec
loopback
setup
Current value:
(config vpn openvpn client name)>
7. (Optional) Set the route metric for the OpenVPN server. If multiple active routes match a
destination, the route with the lowest metric will be used.
(config vpn openvpn client name)> metric value
(config vpn openvpn client name)>
where value is an interger between 0 and 65535. The default is 0.
8. (Optional) Set the login credentials as configured on the OpenVPN server:
(config vpn openvpn client name)> username value
(config vpn openvpn client name)> password value
(config vpn openvpn client name)>
9. Set the IP address of the OpenVPN server:
(config vpn openvpn client name)> server ip_address
(config vpn openvpn client name)>
10. (Optional) Set the port used by the OpenVPN server:
(config vpn openvpn client name)> port port
(config vpn openvpn client name)>
The default is 1194.
11. Paste the contents of the CA certificate (usually in a ca.crt file) into the value of the cacert
parameter:
(config vpn openvpn client name)> cacert value
(config vpn openvpn client name)>
12. Paste the contents of the public key (for example, client.crt) into the value of the public_cert
parameter:
(config vpn openvpn client name)> public_cert value
(config vpn openvpn client name)>
13. Paste the contents of the private key (for example, client.key) into the value of the private_
key parameter:
TX40 User Guide
OpenVPN
545