Digi TX40 User Manual page 119

Interfaces
To configure the modem:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. For single-cellular models, click Network > Modems > WWAN cellular modem or WWAN1
cellular modem.
4. Modem configurations are enabled by default. Click to toggle Enable to off to disable.
5. The Active SIM slot selection is used to determine which SIM slot the modem will attempt to
connect with. For Active SIM slot, select one of the following options:
Any: Use the SIM slot that was last used or was last operational. The default is Any.
n
SIM1: Only use SIM slot 1 with the modem
n
SIM2: Only use SIM slot 2 with the modem
n
6. If you set the Active SIM slot to Any, the Preferred SIM slot option displays. Options for
Preferred SIM slot are:
TX40 User Guide
Use Digi Remote Manager to view and manage your
Wide Area Networks (WANs)
119