Configure The Wi-Fi Radio's Transmit Power - Digi TX40 User Manual

Wi-Fi
b. Set the band for the appropriate radio:
(config)> network wifi radio wifi1 band value
(config)>
where value is either 2400mhz or 5000mhz.
c. Set the mode for the Wi-Fi radio. For example:
n
n
4. Save the configuration and apply the change
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Configure the Wi-Fi radio's transmit power

The default Wi-Fi transmit power that the Wi-Fi radio will use when in access point or client mode is
100 percent. You can configure the Wi-Fi radio to transmit at a lower power.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
TX40 User Guide
If the Wi-Fi radio has a band of 2400mhz:
(config)> network wifi radio wifi1 2400mhz mode value
(config)>
where value is one of b, bg, bgn, g, gn, or n.
If the Wi-Fi radio has a band of 5000mhz:
(config)> network wifi radio wifi1 5000mhz mode value
(config)>
where value is one of ac, acn, or n.
Configure the Wi-Fi radio's transmit power
Use Digi Remote Manager to view and manage your
306