System Administration; Review Device Status - Digi TX40 User Manual

System administration

Review device status

You can review the system of your device from either the Status page of the Web interface, or from
the command line:

Web
To display system information:
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the main menu, click Status.
A secondary menu appears, along with a status panel.
2. On the secondary menu, click to display the details panel for the status you want to view.

Command line
To display system information, use the
n Show basic system information:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
TX40 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system at the prompt:
> show system
(541317s)
TX40 User Guide
show system
Model
Serial Number
SKU
Hostname
MAC Address
Hardware Version
Firmware Version
Alt. Firmware Version
Alt. Firmware Build Date : Fri, Sept 29, 2023 12:10:00
Bootloader Version
Current Time
CPU
Uptime
Temperature
Location
command.
: Digi TX40
: TX40xxxxxxxxyyyyxx
: TX40
: TX40
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 23.9.74.0
: 23.9.74.0
: 19.7.23.0-15f936e0ed
: Fri, Sept 29, 2023 12:10:00 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds
: 40C
:
Review device status
966