Interfaces
6. Set the password that clients will use when connecting to the access point:
(config network wifi ap Example_AP)> encryption key_psk2 password
(config network wifi ap Example_AP)>
7. Save the configuration and apply the change
(config network wireless ap Example_AP)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Task two: Create a new bridge (TX40W )
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Bridges.
4. For Add Bridge, type Example_bridge and click .
The new bridge configuration window is displayed.
TX40 User Guide
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
187