Table of Contents
Advertisement
Interfaces
This feature is useful as it allows a backup system to control the serial port if the primary system goes
offline, or for the primary system to be able to recover regardless of whether there has been a
network disruption.
A low number of retries will end a "stale" connection more quickly that a larger number. The default is
15 retries.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Set the TCP retry attempts value:
a. Click Network > Advanced.
b. For TCP retries2, enter the number of times an unacknowledged TCP data packet will be
transmitted before the connection is considered lost.
Minimum: 0
Maximum: 255
Default: 15
4. Click Apply to save the configuration and apply the change.
TX40 User Guide
Configure a TCP connection timeout
Use Digi Remote Manager to view and manage your
235
Advertisement
Table of Contents
