Reboot Your Device Immediately; Schedule Reboots Of Your Device - Digi TX40 User Manual

System administration

Reboot your device immediately


Web
Log into the TX40 WebUI as a user with full Admin access rights.
1. From the main menu, click System.
2. Click Reboot.
3. Click Reboot to confirm that you want to reboot the device.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> reboot

Schedule reboots of your device


Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
TX40 User Guide
Use Digi Remote Manager to view and manage your
Reboot your TX40 device
979