Hotspot Configuration - Digi TX40 User Manual

Hotspot

Hotspot configuration

This section provides information about enabling and configuring the default hotspot that is provided
with your TX40 installation, as well as creating a new hotspot and configuring the type of
authentication mode you select for your hotspot.
This section contains the following topics:
Enable hotspot using the default configuration
Change the default hotspot SSID
Change the default hotspot IP address and subnet
Change the default hotspot bandwidth limits
Add an Ethernet port to the default hotspot
Use policy routes with hotspot
Create a new hotspot
Configure the hotspot to use local shared password authentication
Configure the hotspot to use RADIUS shared password authentication
Configure the hotspot to use RADIUS users authentication
Configure the hotspot to use HotspotSystem authentication
TX40 User Guide
Hotspot configuration
355
358
360
363
365
368
368
381
383
387
390
354