Table of Contents
Advertisement
Wi-Fi
Configure a Wi-Fi access point with enterprise security
The WPA2 and WPA3 enterprise security modes allows a Wi-Fi access point to authenticate clients by
using one or more RADIUS servers. When the Wi-Fi access point receives a connection request from a
client, it authenticates the client with the RADIUS server before allowing the client to connect.
Using enterprise security modes allows each client to have different usernames and passwords
configured in the RADIUS server, rather than using preshared key on the TX40 device.
By default, the TX40 device comes with two preconfigured access points, Digi AP (Wi-Fi1) and Digi AP
(Wi-Fi2). You cannot delete default access points, but you can modify them or you can create your
own access points.
Note
The TX40 supports two Wi-Fi access points.
Required configuration items
Enable the Wi-Fi access point
n
Select a Wi-Fi radio for the access point.
n
The Service Set Identifier (SSID) for the access point.
n
Configure security for the access point to WPA2 enterprise or WPA3 enterprise.
n
Note
Only select WPA3 Enterprise if you know that all Wi-Fi clients connecting to this device
will have WPA3 capabilities.
The IP address for one or more RADIUS servers.
n
The secret key for one or more RADIUS servers.
n
LAN/bridge assignment. Once you configure a Wi-Fi access point, you must assign the Wi-Fi
n
access point to a LAN interface or to a bridge. See
Configure a bridge
Additional configuration items
n
Determine whether to broadcast the access point's SSID.
n
Determine whether to isolate clients connected to this access point, so that they cannot
communicate with each other.
n
The server port for one or more RADIUS server.
n
The amount of time to wait before changing the group key.
To configure a Wi-Fi access point with WPA2 enterprise or WPA3 enterprise security:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
TX40 User Guide
Configure a Wi-Fi access point with enterprise security
for more information.
Use Digi Remote Manager to view and manage your
Configure a Local Area Network (LAN)
and
323
Advertisement
Table of Contents
