Table of Contents
Advertisement
Hotspot
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Bridges > hotspot_bridge > Devices.
4. Click the to add a new device.
5. By default, For Device, select the appropriate Ethernet port.
By default, the ETH1 device is configured as the device for the WAN interface, and ETH2 is
configured as a device in the LAN bridge, which is used by the LAN interface. As a result, when
you add an Ethernet port to the hotspot, you may need to reconfigure the Ethernet port
configuration for other interfaces. For example, to remove the ETH2 port from the LAN bridge:
a. Click Network > Bridges > LAN > Devices.
b. Click the ... menu icon next to the Ethernet: ETH2 device entry and select Delete.
6. Click Apply to save the configuration and apply the change.
Command line
TX40 User Guide
Hotspot configuration
366
Advertisement
Table of Contents
