Digi TX40 User Manual page 422

Routing
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Create new firewall zones:
a. Create a firewall zone named CellularWAN with Source NAT enabled:
i. Click Firewall > Zones.
ii. For Add Zone, type CellularWAN and click .
iii. Enable Source NAT.
b. Create second firewall zone named EthernetWAN with Source NAT enabled:
i. For Add Zone, type EthernetWAN and click .
ii. Enable Source NAT.
TX40 User Guide
Use Digi Remote Manager to view and manage your
IP routing
422