Digi TX40 User Manual page 797

Applications
unregister(target:str) -> bool
...
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().
Use digidevice runtime to access the runtime database
Use the runt submodule to access and modify the device runtime database.
Read from the runtime database
Use the keys() and get() methods to read the device configuration:
1. Select a device in Remote Manager that is configured to allow shell access to the admin user,
and click Actions > Open Console. Alternatively, log into the TX40 local command line as a
user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.10.1 (main, Mar 30 2023, 23:47:13) [GCC 11.2.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the runt submodule:
>>> from digidevice import runt
>>>
4. Use the start() method to open the runtime database:
>>> runt.start()
>>>
5. Use the keys() method to display available keys in the runtime database, and use the get()
method to print information from the runtime database:
a. Print available keys:
>>> print(runt.keys(""))
This returns available keys:
['advanced', 'drm', 'firmware', 'location', 'manufacture', 'metrics',
'mm', 'network', 'pam', 'serial', 'system']
b. Print available keys for the system key:
>>> print(runt.keys("system"))
This will return the following:
TX40 User Guide
Develop Python applications
797