Digi TX40 User Manual page 179

Interfaces
Create a bridge that includes the WAN/ETH1 port
This procedure will bridge the WAN/ETH1 port with other devices or Wi-Fi access points, which will
configure the included devices to function as a hub.
To create a new bridge, and bridge the TX40 device's WAN/ETH1 Ethernet port with the ETH2 port or
Wi-Fi access points:

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Create the bridge and add devices:
a. Click Network > Bridges.
b. For Add Bridge, type a name for the bridge and click .
c. Click to expand Devices.
d. Click Add Device .
e. For Device, select Device: ETH1.
TX40 User Guide
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
179