Other Default Configuration Settings; Reset Default Password For The Default Admin User - Digi TX54 User Manual

Configuration and management
Interface type
Hotspot

Other default configuration settings

Feature
Central
management
Security policies
Monitoring

Reset default password for the default admin user

When you first log into the WebUI or the command line, you will be required the change the unique,
factory-assigned default password for the default admin user prior to being able to save any changes
TX54 User Guide
Preconfigured
interfaces
hotspot_
n
bridge
hotspot
n
Configuration
Digi Remote Manager enabled as the central management service.
n
Packet filtering allows all outbound traffic.
n
SSH and web administration:
n
Enabled for local administration
l
Firewall zone: Internal
l
Device heath metrics uploaded to Digi Remote Manager at 60 minute
n
interval.
SNMP: Disabled
n
Reset default password for the default admin user
Devices Default configuration
Single-Wi-Fi Disabled
n n
Used by the hotspot
models: Wi-Fi
n
interface
access point:
Digi Hotspot
AP (Wi-Fi)
Dual-Wi-Fi
n
models: Wi-Fi
access point:
Digi Hotspot
AP (Wi-Fi1)
Dual-Wi-Fi
n
models: Wi-Fi
access point:
Digi Hotspot
AP (Wi-Fi2)
Bridge: Disabled
n n
Authentication mode:
hotspot_
n
Click-through
bridge
IP address: 10.1.0.1/24
n
DHCP server:
n
Automatically enabled
(on all hotspots)
DHCP server lease
n
range: 100-250
31