Table of Contents
Advertisement
System administration
Log into the TX40 WebUI as a user with full Admin access rights.
1. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
2. In the Erase configuration section, click ERASE.
3. Click CONFIRM.
4. After resetting the device:
a. Connect to the TX40 by using the serial port or by using an Ethernet cable to connect the
TX40 LAN port to your PC.
b. Log into the TX40:
User name: Use the default user name: admin.
Password: Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
c. (Optional) Reset the default password for the admin account. See
password for the admin user
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Enter the following:
> system factory-erase
TX40 User Guide
Erase device configuration and reset to factory defaults
for further information.
Change the default
982
Advertisement
Table of Contents
