Table of Contents
Advertisement
Services
8. Configure the GNSS location service for ITxPT:
a. The location service is enabled by default. To enable, if it has been disabled:
(config)> service location enable true
(config)>
b. The GNSS location source is enabled by default. If it has been disabled:
(config)> service location source 1 enable true
(config)>
c. Enable the device to include GNSS information with ITxPT support:
(config)> service location itxpt enable true
(config)>
d. Set the priority for GNSS information. A lower number represents higher priority.
(config)> service location itxpt priority int
(config)>
The default is 0.
e. Set the relative weight for records with same priority. A higher number means that records
from this service are more preferred.
(config)> service location itxpt weight int
(config)>
The default is 0.
TX40 User Guide
Information Technology for Public Transport (ITxPT) support
Zones: A list of groups of network interfaces that
can be referred to by packet
filtering rules and access control lists.
Additional Configuration
----------------------------------------------------
---------------------------
any
dynamic_routes
edge
external
hotspot
internal
ipsec
loopback
setup
(config)>
Repeat this step to include additional firewall zones.
751
Advertisement
Table of Contents
