Digi TX40 User Manual page 190

Interfaces
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Create LAN1:
a. Click Network > Interfaces.
b. For Add Interface:, type LAN1 and click .
c. For Zone, select Internal.
d. For Device:
n
n
e. Click to expand IPv4.
f. For Address, type 192.168.3.1/24.
g. Click to expand DHCP server.
h. Click Enable.
4. Create LAN2:
a. Click Network > Interfaces.
b. For Add Interface:, type LAN2 and click .
c. For Zone, select Internal.
d. For Device, select Ethernet: ETH2.
e. Click to expand IPv4.
TX40 User Guide
If you are configuring a Wi-Fi enabled TX40W, select Bridge: Example_bridge.
If you are configuring a non-Wi-Fi TX40, select Ethernet: ETH1.
Local Area Networks (LANs)
190