Table of Contents
Advertisement
Services
Repeat this step to include additional firewall zones.
4. (Optional) Set the private key in PEM format. If not set, the device will use an automatically-
generated key.
(config)> service ssh key key.pem
(config)>
5. (Optional) Configure Multicast DNS (mDNS)
mDNS is a protocol that resolves host names in small networks that do not have a DNS server.
mDNS is enabled by default. To disable mDNS, or enable it if it has been disabled:
To enable the mDNS protocol:
n
(config)> service ssh mdns enable true
(config>
To disable the mDNS protocl:
n
(config)> service ssh mdns enable false
(config)>
6. (Optional) Set the port number for this service.
The default setting of 22 normally should not be changed.
(config)> service ssh port 24
(config)>
7. To create custom SSH configuration settings:
a. Enable custom configurations:
(config)> service ssh custom enable true
(config)>
b. To override the standard SSH configuration and only use the config_file parameter:
(config)> service ssh custom override true
(config)>
n
n
c. Set the configuration settings:
(config)> service ssh custom config_file value
(config)>
TX40 User Guide
(config)>
If override is set to true, entries in Configuration file will be used in place of the
standard SSH configuration.
If override is set to false, entries in Configuration file will be added to the
standard SSH configuration.
The default is false.
Configure SSH access
638
Advertisement
Table of Contents
