Digi TX40 User Manual page 651

Table of Contents

Advertisement

Services
A single IP address or host name.
l
A network designation in CIDRnotation, for example, 2001:db8::/48.
l
any: No limit to IPv6 addresses that can access the DNS service.
l
Repeat this step to list additional IP addresses or networks.
n
To limit access to hosts connected through a specified interface on the TX40 device:
(config)> add service dns acl interface end value
(config)>
Where value is an interface defined on your device.
Repeat this step to list additional interfaces.
n
To limit access based on firewall zones:
(config)> add service dns acl zone end value
(config)>
Where value is a firewall zone defined on your device, or the any keyword.
Repeat this step to include additional firewall zones.
4. (Optional) Cache negative responses
By default, the device's DNS server caches negative responses. Disabling this option may
improve performance on networks with transient DNS results, when one or more DNS servers
TX40 User Guide
Display a list of available interfaces:
Use ... network interface ? to display interface information:
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
-----------------------
any
dynamic_routes
edge
external
hotspot
internal
ipsec
loopback
setup
(config)>
Configure DNS
651

Advertisement

Table of Contents
loading

Table of Contents