Update Modem Firmware By Using A Local Firmware File - Digi TX40 User Manual

Table of Contents

Advertisement

System administration
Checking for latest Generic firmware ...
Retrieving modem firmware list ...
Newest firmware version available to download is '25.20.666_CUST_
067_1'
Retrieving download location for modem firmware '25.20.666_CUST_067_
1' ...
>
n
To perform an OTA firmware update by using a specific version from the Digi firmware
repository, use the version parameter to identify the appropriate firmware version as
determined by using modem firmware ota list command. For example::
>
Retrieving download location for modem firmware '24.01.5x4_ATT' ...
Downloading modem firmware '24.01.5x4_ATT' to '/opt/LE910C4_
NF/Custom_Firmware' ...
Modem firmware '24.01.5x4_ATT' downloaded
Updating modem firmware ...
Programming modem firmware ...
Found modem ...
Validate modem firmware ...
Getting ready for update ...
Stopping services ...
Running update pass 1 of 3 ...
Restarting services ...
-----------------------------
Successfully updated firmware
Modem firmware update complete
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Update modem firmware by using a local firmware file

You can update your modem firmware by uploading a modem firmware file to your TX40 device.
Firmware should be uploaded to /opt/MODEM_MODEL/Custom_Firmware, for example,
/opt/LM940/Custom_Firmware.
Modem firmware can be downloaded from Digi here. Follow instructions on this page to determine
the cellular module used by your device. After downloading, use tar or a similar unzipping tool to
extract the firmware prior to uploading to the device. Note that the firmware file may not have a
tar.gz extension, but it is a tar file and can be unzipped with tar or a similar tool. See
command
for information about uploading files to the TX40 device.
1. Select the device in Remote Manager and click Actions > Open Console, or log into the TX40
local command line as a user with full Admin access rights.
TX40 User Guide
modem firmware ota update version 24.01.5x4_ATT
Update cellular module firmware
Use the scp
977

Advertisement

Table of Contents
loading

Table of Contents