Table of Contents
Advertisement
Digi TX40 hardware reference
GNSS Service
n
Solid Green: GNSS is enabled and has a valid fix.
n
Blinking Green: GNSS is enabled but does not have a valid fix.
n
Off: GNSS is not enabled.
Power
Off: No power.
n
Blinking Blue: Unit is powering on.
n
Blue: Unit has power.
n
Ethernet 1-2 Link and Activity (on rear panel)
The LEDs on the WAN/ETH1 and ETH2 ports indicate that the Ethernet network interface is up and
there is activity on the network interface.
Left LED (on top of port connector)
n
Off: No Ethernet link detected.
n
Blinking amber: Indicates Ethernet traffic.
Right LED (on top of port connector)
n
Off: No Ethernet link detected.
n
Solid green: 10/100 Mbps link detected.
n
Solid amber: 1000 Mbps link detected.
TX40 back view
The following figures shows the back view of the TX40.
n
5Gmodels:
TX40 User Guide
TX40 back view
23
Advertisement
Table of Contents
